O.E.M cylinders and pistons produced by TRESZER company


Cylinder and piston kit Trészer Chainsaws ST MS260, 44,7mm..

Cylinder and piston kit Trészer Chainsaws ST MS260, 44,7mm..

Model name 06-61-011

. Piston group to chainsaw stihl. Applied in MS260 models. Complete piston: cylinder, piston, two piston rings, two locking rings, pin. The cylinder mirror coating is executed by industrial chromium. The value of the hardness of the chromium coating is 68 HRC. The thickness of the working walls of the cylinder is 0.21 mm. Diameter of the cylinder internal - 44.7mm. The coating of the cylinder walls allows you to obtain a resource of work to a full wear of about 900 motor. Manufacturer Trészer - Germany. Hochwertige Bauteile & nbsp; Instructions for installing a new cylinder chainsaw and motorcycle Check that the cylinder which you plan to install is suitable for your model of chainsaw or motorcycles. Check and clean the carburetorIt is very important, remove the old fuel tank fuel. Install a new fuel filter. If you use an old fuel filter, remove all the remnants of the old fuel from it. Clean the carter. Thinking a compressor carter. Carefully check that the carter is clean. Add a bit of lubricants on the bearings. Try to immuse the highest quality lubrication. Wipe a new cylinder duster with a solvent and purge air from compressor The piston and install the piston so that the arrow on it was sent to the exhaust direction. Very carefully install the locking rings, do not bend and do not twist them. Lubricate the cylinder and piston rings. Carefully set the cylinder. Use a compression of rings. Always use a new laying when replacing the cylinder of chainsaw or motorcycle. In some models, the sealant is used. tighten the screws with the efforts specified by the manufacturer. Gently check the engine. Make sure it rotates freely and without interference. For the first refueling, make a fuel mixture in a ratio of 25 - 1 and run a chainsaw or motorcycle. Adjust the carburetor and protest the tool in operation. Note. Failure to comply with these instructions may cause another exit of chainsaw or motorcycle. ..

PRICE 79.38 EUR.

Piston Trészer Brushcutters HU 125, 128..

Piston Trészer Brushcutters HU 125, 128..

Model name 08-62-118

Piston of motorcycle Husqvarna 125, 128, 35mm. Catalog number - 08-62-118 Piston is used in motorcycles Husqvarna 125 models, 128. Diameter of piston 35 mm In the piston delivery kit you will find: piston, piston ring, piston rings, piston pin Spare parts manufacturer Trészer - Germany Hochwertige Bauteile ..

PRICE 8.50 EUR.

Piston Trészer Chainsaw 5200, 45mm..

Piston Trészer Chainsaw 5200, 45mm..

Model name 08-62-103

Piston is used for repairing chainsaws of Chinese, Russian, Belarusian and inexpensive European brands, models 5200. Suitable for the dust of this model, all years of release. Piston diameter 45mm. The piston delivery kit includes: Piston with oil-containing crop - 1pc. Ring of piston thickness 1.2 mm - 2 pcs. pin - 1pc. pin Rings - 2pcs. Formal cardboard packaging - 1pc. Diameter of the piston pin - 11mm. Manufacturer Trészer - Germany. Hochwertige Bauteile ..

PRICE 4.59 EUR.

Piston Trészer Chainsaw Hu 142, 40mm..

Piston Trészer Chainsaw Hu 142, 40mm..

Model name 08-62-014

Piston chainsaws HUSQVARNA 142, 40mm. Catalog number - 08-62-014 In a pack of given piston you will find: a piston with a diameter of 40 mm, a piston ring with a thickness of 1.5 mm - 1pc, a pin, locking rings of a pin 2 pcs Piston diameter - 40 mm Piston height - 34 mm Piston skirt - 29 mm The hot belt is 3.5 mm Height of grooves under the compression ring - 1.5 mm Diameter for a piston pin - 10 mm Spare parts manufacturer Trészer - Germany Hochwertige Bauteile ..

PRICE 7.02 EUR.

Piston Trészer Chainsaw Hu 345, 345R, JS CS2145, 42mm..

Piston Trészer Chainsaw Hu 345, 345R, JS CS2145, 42mm..

Model name 08-62-016

Piston is used for repairing chainsaws of HUSQVARNA brand, models 345, JONSERED CS2145. Suitable for the dust of these models, all years of release. Also, the piston is used in HUSQVARNA 345R motorcycles. Piston diameter 42mm. The piston delivery kit includes: Piston with oil-containing crop - 1pc. Ring piston thickness of 1.5 mm - 1pc. pin - 1pc. pin Rings - 2pcs. Formal cardboard packaging - 1pc. original code HUSQVARNA: # 503 90 73-71 Manufacturer Trészer - Germany. Hochwertige Bauteile ..

PRICE 8.93 EUR.

Piston Trészer Motors TL430, 40mm..

Piston Trészer Motors TL430, 40mm..

Model name 08-62-121

Piston complete with rings of motorcycles. Applies in Chinese motorcycles, Russian and inexpensive European brands. to Motorcase Model 430 with a piston at 40mm. Includes delivery goes: piston, two piston rings, two locking rings, pin. Piston diameter - 40mm. Thickness of piston rings - 1,5mm. Radial nasech, executed on the walls of the piston, allows you to hold an oil film to improve cooling. Manufacturer Trészer - Germany. Hochwertige Bauteile ..

PRICE 4.82 EUR.

Go to next page