Saw chains

Used in chainsaws of inexpensive brands 4500, 5200, Chinese Russian and European production. Guide b...

Used in chainsaws of inexpensive brands 4500, 5200, Chinese Russian and European production.

Guide bar length - 45cm/18.

Saw chain pitch - .325.

The thickness of the leading link is 1.5mm.

Number of leading chain links - 72.

Cutting link type - full chisel (super tooth).

Laser notch for sharpening control - yes.

There is a container for oil in the connecting link.

There is a hole in the drive link for oil distribution in the tire groove.

Double Tyrsogon for smooth cutting into wood - yes.

Hardened rivet metal - yes.

Coating of the cutting tooth with chrome - yes.

Special heat treatment of the cutting tooth using the Blue Tooth technology - yes.

Article of a similar chain ST - 25RS72

Article of a similar OREGON chain - 21LPX72

The chain is designed for sawing hardwood. Attention! High performance chain. The connecting links of the chain are provided with oil baths for additional lubrication of the rivets. Due to this, the chain does not stretch. A hole is made in the leading link of the chain for the distribution of lubricant along the groove of the bar. This solution helps to reduce wear on the drive links and the bar groove.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

Used in chainsaw models - ST MS170, MS171, MS180, MS181, MS210, MS211, MS230, MS250. Cutting chain f...

Used in chainsaw models - ST MS170, MS171, MS180, MS181, MS210, MS211, MS230, MS250.

Cutting chain for chainsaw - super tooth.

Used on a guide rail length - 35cm/14

Number of leading chain links - 50

Chain pitch - 3/8 LP

Leading link thickness - 1.3mm

The chain manufacturer is SABER, Serbia.

Special technological solutions to improve cutting performance.

1) Tooth shape full chisel.

A cutting tooth of this shape easily and quickly enters the wood, like a small planer. The square shape of the tooth creates minimal cutting resistance and allows you to work at higher speeds. The tooth selects large, long chips.

2) Coating of the cutting tooth with chrome.

Chrome-plated steel cutting tooth shows even greater hardness and wear resistance. In addition, chrome plating protects the chain from corrosion.

3) Laser notch.

Each cutting tooth has a laser cut on the edge. It allows you to control chain wear and sharpen in time.

Special techniques to increase the wear resistance of the chain.

1) Heat treatment of the cutting tooth.

The steel cutting tooth is hardened to increase strength and hardness. Due to this, it acquires a bluish tint and the so-called blue tooth is obtained.

2) Special groove in each drive link.

Each of the leading links of the chain has a stamped groove leading from the bottom of the link to the place where the rivet is attached. This groove serves to supply lubricating oil to the rivet for cooling and reducing friction. Thanks to this, the chain does not stretch.

3) Oil container in the connecting link.

Each link has a stamped oil groove. Due to this, there is always a fresh portion of oil near the rivet, which perfectly cools the metal and reduces the thermal effect of chain friction. This engineering solution reduces chain wear.

4) Hole for the distribution of chain oil along the groove of the bar.

Each drive link has a small hole at the base. Thanks to this hole, oil droplets are evenly distributed in the groove of the bar. This reduces the mutual friction of the bar and chain and allows you to increase their service life.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

Used on a guide bar length -//coiled chain Number of leading chain links - 1640 Chain pitch - 3/8 LP...

Used on a guide bar length -//coiled chain

Number of leading chain links - 1640

Chain pitch - 3/8 LP

Leading link thickness - 1.3mm

Used in models of chainsaws -//chain in the bay.

Special technological solutions to improve cutting performance.

1) Tooth shape full chisel.

A cutting tooth of this shape easily and quickly enters the wood, like a small planer. The square shape of the tooth creates minimal cutting resistance and allows you to work at higher speeds. The tooth selects large, long chips.

2) Coating of the cutting tooth with chrome.

Chrome-plated steel cutting tooth shows even greater hardness and wear resistance. In addition, chrome plating protects the chain from corrosion.

3) Laser notch.

Each cutting tooth has a laser cut on the edge. It allows you to control chain wear and sharpen in time.

Special techniques to increase the wear resistance of the chain.

1) Heat treatment of the cutting tooth.

The steel cutting tooth is hardened to increase strength and hardness. Due to this, it acquires a bluish tint and the so-called blue tooth is obtained.

2) Special groove in each drive link.

Each of the leading links of the chain has a stamped groove leading from the bottom of the link to the place where the rivet is attached. This groove serves to supply lubricating oil to the rivet for cooling and reducing friction. Thanks to this, the chain does not stretch.

3) Oil container in the connecting link.

Each link has a stamped oil groove. Due to this, there is always a fresh portion of oil near the rivet, which perfectly cools the metal and reduces the thermal effect of chain friction. This engineering solution reduces chain wear.

4) Hole for the distribution of chain oil along the groove of the bar.

Each drive link has a small hole at the base. Thanks to this hole, oil droplets are evenly distributed in the groove of the bar. This reduces the mutual friction of the bar and chain and allows you to increase their service life.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

Cutting chain for chainsaw in coil. Chain pitch - .325. The thickness of the leading link is 1.5mm. ...

Cutting chain for chainsaw in coil.

Chain pitch - .325.

The thickness of the leading link is 1.5mm.

Number of leading chain links - 1840

Overview chain for TRESZER chainsaw super-tooth .325

Cutting link type - full chisel (super tooth).

Laser notch for sharpening control - yes.

There is a container for oil in the connecting link.

There is a hole in the drive link for oil distribution in the tire groove.

Hardened rivet metal - yes.

Coating of the cutting tooth with chrome - yes.

Special heat treatment of the cutting tooth using the Blue Tooth technology - yes.

Article of a similar chain ST - 25RS100R

Article of a similar OREGON chain - 21LPX100R

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

Used in HUSQVARNA 40, 45, 51, 55, 359, 357, 445, 450, 455 chainsaws Guide bar length - 38.5cm/15. Sa...

Used in HUSQVARNA 40, 45, 51, 55, 359, 357, 445, 450, 455 chainsaws

Guide bar length - 38.5cm/15.

Saw chain pitch - .325.

The thickness of the leading link is 1.5mm.

Number of leading chain links - 64

Cutting link type - full chisel (super tooth).

Laser notch for sharpening control - yes.

There is a container for oil in the connecting link.

There is a hole in the drive link for oil distribution in the tire groove.

Double Tyrsogon for smooth cutting into wood - yes.

Hardened rivet metal - yes.

Coating of the cutting tooth with chrome - yes.

Special heat treatment of the cutting tooth using the Blue Tooth technology - yes.

Article of a similar chain ST - 25RS64

Article of a similar OREGON chain - 21LPX64

The chain is designed for sawing hardwood. Attention! High performance chain. The connecting links of the chain are provided with oil baths for additional lubrication of the rivets. Due to this, the chain does not stretch. A hole is made in the leading link of the chain for the distribution of lubricant along the groove of the bar. This solution helps to reduce wear on the drive links and the bar groove.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

It is used in chainsaw models - HUSQVARNA 236, OLEO-MAC 936, 937, PARTNER 350, 351, 372, POULAN 2050...

It is used in chainsaw models - HUSQVARNA 236, OLEO-MAC 936, 937, PARTNER 350, 351, 372, POULAN 2050, 2150, MAKITA DCS-34, DCS-400, DOLMAR PS-34, PS-45, PS400 , ECHO CS-352ES, JONSERED CS2137, CS2138, CS2234, CS2237.

Cutting chain for chainsaw - super tooth.

Used on a guide rail length - 35cm/14

Number of leading chain links - 52.

Chain pitch - 3/8 LP

Leading link thickness - 1.3mm

Special technological solutions to improve cutting performance.

1) Tooth shape full chisel.

A cutting tooth of this shape easily and quickly enters the wood, like a small planer. The square shape of the tooth creates minimal cutting resistance and allows you to work at higher speeds. The tooth selects large, long chips.

2) Coating of the cutting tooth with chrome.

Chrome-plated steel cutting tooth shows even greater hardness and wear resistance. In addition, chrome plating protects the chain from corrosion.

3) Laser notch.

Each cutting tooth has a laser cut on the edge. It allows you to control chain wear and sharpen in time.

Special techniques to increase the wear resistance of the chain.

1) Heat treatment of the cutting tooth.

The steel cutting tooth is hardened to increase strength and hardness. Due to this, it acquires a bluish tint and the so-called blue tooth is obtained.

2) Special groove in each drive link.

Each of the leading links of the chain has a stamped groove leading from the bottom of the link to the place where the rivet is attached. This groove serves to supply lubricating oil to the rivet for cooling and reducing friction. Thanks to this, the chain does not stretch.

3) Oil container in the connecting link.

Each link has a stamped oil groove. Due to this, there is always a fresh portion of oil near the rivet, which perfectly cools the metal and reduces the thermal effect of chain friction. This engineering solution reduces chain wear.

4) Hole for the distribution of chain oil along the groove of the bar.

Each drive link has a small hole at the base. Thanks to this hole, oil droplets are evenly distributed in the groove of the bar. This reduces the mutual friction of the bar and chain and allows you to increase their service life.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

Used in chainsaws of inexpensive brands 4500, 5200, 5800 of Chinese Russian and European production....

Used in chainsaws of inexpensive brands 4500, 5200, 5800 of Chinese Russian and European production.

Guide bar length - 50cm/20.

Saw chain pitch - .325.

The thickness of the leading link is 1.5mm.

Number of leading chain links - 76.

Cutting link type - full chisel (super tooth).

Laser notch for sharpening control - yes.

There is a container for oil in the connecting link.

There is a hole in the drive link for oil distribution in the tire groove.

Double Tyrsogon for smooth cutting into wood - yes.

Hardened rivet metal - yes.

Coating of the cutting tooth with chrome - yes.

Special heat treatment of the cutting tooth using the Blue Tooth technology - yes.

Article of a similar chain ST - 25RS76

Article of a similar OREGON chain - 21LPX76

The chain is designed for sawing hardwood. Attention! High performance chain. The connecting links of the chain are provided with oil baths for additional lubrication of the rivets. Due to this, the chain does not stretch. A hole is made in the leading link of the chain for the distribution of lubricant along the groove of the bar. This solution helps to reduce wear on the drive links and the bar groove.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

Used in chainsaw models - OLEO-MAC GS-35, EFCO MT-350 Cutting chain for chainsaw - super tooth. Used...

Used in chainsaw models - OLEO-MAC GS-35, EFCO MT-350

Cutting chain for chainsaw - super tooth.

Used on a guide rail length - 35cm/14

Number of leading chain links - 53

Chain pitch - 3/8 LP

Leading link thickness - 1.3mm

Special technological solutions to improve cutting performance.

1) Tooth shape full chisel.

A cutting tooth of this shape easily and quickly enters the wood, like a small planer. The square shape of the tooth creates minimal cutting resistance and allows you to work at higher speeds. The tooth selects large, long chips.

2) Coating of the cutting tooth with chrome.

Chrome-plated steel cutting tooth shows even greater hardness and wear resistance. In addition, chrome plating protects the chain from corrosion.

3) Laser notch.

Each cutting tooth has a laser cut on the edge. It allows you to control chain wear and sharpen in time.

Special techniques to increase the wear resistance of the chain.

1) Heat treatment of the cutting tooth.

The steel cutting tooth is hardened to increase strength and hardness. Due to this, it acquires a bluish tint and the so-called blue tooth is obtained.

2) Special groove in each drive link.

Each of the leading links of the chain has a stamped groove leading from the bottom of the link to the place where the rivet is attached. This groove serves to supply lubricating oil to the rivet for cooling and reducing friction. Thanks to this, the chain does not stretch.

3) Oil container in the connecting link.

Each link has a stamped oil groove. Due to this, there is always a fresh portion of oil near the rivet, which perfectly cools the metal and reduces the thermal effect of chain friction. This engineering solution reduces chain wear.

4) Hole for the distribution of chain oil along the groove of the bar.

Each drive link has a small hole at the base. Thanks to this hole, oil droplets are evenly distributed in the groove of the bar. This reduces the mutual friction of the bar and chain and allows you to increase their service life.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

Used in chainsaw models - OLEO-MAC 941, electric saws. Cutting chain for chainsaw - super tooth. Use...

Used in chainsaw models - OLEO-MAC 941, electric saws.

Cutting chain for chainsaw - super tooth.

Used on a guide rail length - 40cm/16

Number of leading chain links - 57

Chain pitch - 3/8 LP

Leading link thickness - 1.3mm

Special technological solutions to improve cutting performance.

1) Tooth shape full chisel.

A cutting tooth of this shape easily and quickly enters the wood, like a small planer. The square shape of the tooth creates minimal cutting resistance and allows you to work at higher speeds. The tooth selects large, long chips.

2) Coating of the cutting tooth with chrome.

Chrome-plated steel cutting tooth shows even greater hardness and wear resistance. In addition, chrome plating protects the chain from corrosion.

3) Laser notch.

Each cutting tooth has a laser cut on the edge. It allows you to control chain wear and sharpen in time.

Special techniques to increase the wear resistance of the chain.

1) Heat treatment of the cutting tooth.

The steel cutting tooth is hardened to increase strength and hardness. Due to this, it acquires a bluish tint and the so-called blue tooth is obtained.

2) Special groove in each drive link.

Each of the leading links of the chain has a stamped groove leading from the bottom of the link to the place where the rivet is attached. This groove serves to supply lubricating oil to the rivet for cooling and reducing friction. Thanks to this, the chain does not stretch.

3) Oil container in the connecting link.

Each link has a stamped oil groove. Due to this, there is always a fresh portion of oil near the rivet, which perfectly cools the metal and reduces the thermal effect of chain friction. This engineering solution reduces chain wear.

4) Hole for the distribution of chain oil along the groove of the bar.

Each drive link has a small hole at the base. Thanks to this hole, oil droplets are evenly distributed in the groove of the bar. This reduces the mutual friction of the bar and chain and allows you to increase their service life.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

Used in OLEO-MAC 947, 952 chainsaws, as well as in Chinese, Russian and inexpensive European brands ...

Used in OLEO-MAC 947, 952 chainsaws, as well as in Chinese, Russian and inexpensive European brands

Guide bar length - 40cm/16.

Saw chain pitch - .325.

The thickness of the leading link is 1.5mm.

Number of leading chain links - 66

Cutting link type - full chisel (super tooth).

Laser notch for sharpening control - yes.

There is a container for oil in the connecting link.

There is a hole in the drive link for oil distribution in the tire groove.

Double Tyrsogon for smooth cutting into wood - yes.

Hardened rivet metal - yes.

Coating of the cutting tooth with chrome - yes.

Special heat treatment of the cutting tooth using the Blue Tooth technology - yes.

Article of a similar chain ST - 25RS66

Article of a similar OREGON chain - 21LPX66

The chain is designed for sawing hardwood. Attention! High performance chain. The connecting links of the chain are provided with oil baths for additional lubrication of the rivets. Due to this, the chain does not stretch. A hole is made in the leading link of the chain for the distribution of lubricant along the groove of the bar. This solution helps to reduce wear on the drive links and the bar groove.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

Used in chainsaw models - ST MS170, MS180, MS210, MS230, MS250. Cutting chain for chainsaw - super t...

Used in chainsaw models - ST MS170, MS180, MS210, MS230, MS250.

Cutting chain for chainsaw - super tooth.

Used on a guide rail length - 40cm/16

Number of leading chain links - 55

Chain pitch - 3/8 LP

Leading link thickness - 1.3mm

Special technological solutions to improve cutting performance.

1) Tooth shape full chisel.

A cutting tooth of this shape easily and quickly enters the wood, like a small planer. The square shape of the tooth creates minimal cutting resistance and allows you to work at higher speeds. The tooth selects large, long chips.

2) Coating of the cutting tooth with chrome.

Chrome-plated steel cutting tooth shows even greater hardness and wear resistance. In addition, chrome plating protects the chain from corrosion.

3) Laser notch.

Each cutting tooth has a laser cut on the edge. It allows you to control chain wear and sharpen in time.

Special techniques to increase the wear resistance of the chain.

1) Heat treatment of the cutting tooth.

The steel cutting tooth is hardened to increase strength and hardness. Due to this, it acquires a bluish tint and the so-called blue tooth is obtained.

2) Special groove in each drive link.

Each of the leading links of the chain has a stamped groove leading from the bottom of the link to the place where the rivet is attached. This groove serves to supply lubricating oil to the rivet for cooling and reducing friction. Thanks to this, the chain does not stretch.

3) Oil container in the connecting link.

Each link has a stamped oil groove. Due to this, there is always a fresh portion of oil near the rivet, which perfectly cools the metal and reduces the thermal effect of chain friction. This engineering solution reduces chain wear.

4) Hole for the distribution of chain oil along the groove of the bar.

Each drive link has a small hole at the base. Thanks to this hole, oil droplets are evenly distributed in the groove of the bar. This reduces the mutual friction of the bar and chain and allows you to increase their service life.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

Used in chainsaws ST MS 260, MS 270, MS 280. Guide bar length - 40cm/16. Saw chain pitch - .325. The...

Used in chainsaws ST MS 260, MS 270, MS 280.

Guide bar length - 40cm/16.

Saw chain pitch - .325.

The thickness of the leading link is 1.5mm.

Number of leading chain links - 67

Cutting link type - full chisel (super tooth).

Laser notch for sharpening control - yes.

There is a container for oil in the connecting link.

There is a hole in the drive link for oil distribution in the tire groove.

Double Tyrsogon for smooth cutting into wood - yes.

Hardened rivet metal - yes.

Coating of the cutting tooth with chrome - yes.

Special heat treatment of the cutting tooth using the Blue Tooth technology - yes.

Article of a similar chain ST - 25RS67

Article of a similar OREGON chain - 21LPX67

The chain is designed for sawing hardwood. Attention! High performance chain. The connecting links of the chain are provided with oil baths for additional lubrication of the rivets. Due to this, the chain does not stretch. A hole is made in the leading link of the chain for the distribution of lubricant along the groove of the bar. This solution helps to reduce wear on the drive links and the bar groove.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

It is used in chainsaw models - HUSQVARNA 240, 135, 140, PARTNER 350, 351, 372, POULAN 2050, 2150, 2...

It is used in chainsaw models - HUSQVARNA 240, 135, 140, PARTNER 350, 351, 372, POULAN 2050, 2150, 2250, MAKITA DCS-34, DCS-400, DOLMAR PS-34, PS-45, PS400, JONSERED CS2137, CS2138, CS2234, CS2237, Chinese brand chainsaws 3800.

Cutting chain for chainsaw - super tooth.

Used on a guide rail length - 40cm/16

Number of leading chain links - 56

Chain pitch - 3/8 LP

Leading link thickness - 1.3mm

Special technological solutions to improve cutting performance.

1) Tooth shape full chisel.

A cutting tooth of this shape easily and quickly enters the wood, like a small planer. The square shape of the tooth creates minimal cutting resistance and allows you to work at higher speeds. The tooth selects large, long chips.

2) Coating of the cutting tooth with chrome.

Chrome-plated steel cutting tooth shows even greater hardness and wear resistance. In addition, chrome plating protects the chain from corrosion.

3) Laser notch.

Each cutting tooth has a laser cut on the edge. It allows you to control chain wear and sharpen in time.

Special techniques to increase the wear resistance of the chain.

1) Heat treatment of the cutting tooth.

The steel cutting tooth is hardened to increase strength and hardness. Due to this, it acquires a bluish tint and the so-called blue tooth is obtained.

2) Special groove in each drive link.

Each of the leading links of the chain has a stamped groove leading from the bottom of the link to the place where the rivet is attached. This groove serves to supply lubricating oil to the rivet for cooling and reducing friction. Thanks to this, the chain does not stretch.

3) Oil container in the connecting link.

Each link has a stamped oil groove. Due to this, there is always a fresh portion of oil near the rivet, which perfectly cools the metal and reduces the thermal effect of chain friction. This engineering solution reduces chain wear.

4) Hole for the distribution of chain oil along the groove of the bar.

Each drive link has a small hole at the base. Thanks to this hole, oil droplets are evenly distributed in the groove of the bar. This reduces the mutual friction of the bar and chain and allows you to increase their service life.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.

It is used in chainsaw models - Chinese 3800 chainsaws, electric saws. Cutting chain for chainsaw - ...

It is used in chainsaw models - Chinese 3800 chainsaws, electric saws.

Cutting chain for chainsaw - super tooth.

Used on a guide rail length - 45cm/18

Number of leading chain links - 62

Chain pitch - 3/8 LP

Leading link thickness - 1.3mm

Special technological solutions to improve cutting performance.

1) Tooth shape full chisel.

A cutting tooth of this shape easily and quickly enters the wood, like a small planer. The square shape of the tooth creates minimal cutting resistance and allows you to work at higher speeds. The tooth selects large, long chips.

2) Coating of the cutting tooth with chrome.

Chrome-plated steel cutting tooth shows even greater hardness and wear resistance. In addition, chrome plating protects the chain from corrosion.

3) Laser notch.

Each cutting tooth has a laser cut on the edge. It allows you to control chain wear and sharpen in time.

Special techniques to increase the wear resistance of the chain.

1) Heat treatment of the cutting tooth.

The steel cutting tooth is hardened to increase strength and hardness. Due to this, it acquires a bluish tint and the so-called blue tooth is obtained.

2) Special groove in each drive link.

Each of the leading links of the chain has a stamped groove leading from the bottom of the link to the place where the rivet is attached. This groove serves to supply lubricating oil to the rivet for cooling and reducing friction. Thanks to this, the chain does not stretch.

3) Oil container in the connecting link.

Each link has a stamped oil groove. Due to this, there is always a fresh portion of oil near the rivet, which perfectly cools the metal and reduces the thermal effect of chain friction. This engineering solution reduces chain wear.

4) Hole for the distribution of chain oil along the groove of the bar.

Each drive link has a small hole at the base. Thanks to this hole, oil droplets are evenly distributed in the groove of the bar. This reduces the mutual friction of the bar and chain and allows you to increase their service life.

The spare part is manufactured by TRÉSZER - Germany.
Hochwertige Bauteile

Quality: Premium.